-
Install MQTT in Home-Assistant
Go to Settings –> Add-on –Add-on Store and search for MQTT Click on Mosquitto broker, then click install Select Start on boot and Watchdog, nothing need to be done in the configuration tab…
-
Add Entities
To create a new entity within the code then you need access to the config file. To do this go to Settings –> Add-on –> Addon Store and find Visual Studio Code Click…
-
SolarSynk Add-on
Install the Add-on Inside Home Assistant go to Settings –> Add-on –> Ass-on Store.In the top right corner click the 3 dots and select Repositories. SolarSynk is not part of the Home Assistant…
-
-
Sunsynk Scraper
Sunsynk Scraper uses MQTT to install MQTT in Home Assistant click HERE Sunsynk Scraper is not a Home Assistant Community Add-on so you must add the repository manually.To do this go to Settings…
-
Sunsynk Add-on
Before starting this you must have MQTT Broker installed click HERE to see howModbus Adapter connected to your inverter, click HERE to see howSet Modbus on the inverter, click HERE to see how…
-
Solar Assistant
You can get Solar Assistant directly from the site HERE. You can purchase all the hardware required from the site, but if you want to just purchase the software and configure everything your…
-
ESP Home
Using an ESP32 to get data from the RS485 port on the Sunsynk inverter. To do this you will need the following: ESP32 ESP Modbus Adapter RJ45 Shielded Cable You don’t always need…
-
Connect Sunsynk-Inverter to Home AssistantÂ
To connect your inverter to Home Assistant you have 2 ways, each way has multiple options For anyone thinking of connecting their Sunsynk Inverter to Home Assistant. Here are the options on how…