-
-
-
OpenHasp Light Switch
I ordered this Light Switch Screen ESP32-S3 Arduino LVGL WIFI&Bluetooth Development Board 4.0 “480 * 480 Smart Display 4.0 inch This light switch has a USB-C connection on the side. Flash using Install…
-
-
Password Recovery Procedure for the Catalyst 4500 switch (deleting configuration)
Boot Switch:Press CTRL + C to prevent autobooting rommon 1 > [interrupt] rommon 1 >confreg rommon 2 >boot Or pull the power cord. The system will autoboot in 5 seconds ***** Again Press…
-
Elecrow 7″ Screen with OpenHasp
This is only available thanks to bloft/openHASP-pages: openHASP-pages (github.com) Visit the Elecrow page on OpenHasp Down the bottom, you will find a link https://nightly.openhasp.com/ Select Crowpanel 7″ Scroll to the bottom and Select…
-
Power-Flow-Display
I purchased this screen from Elecrow, it is only 2.4 inches so small making sure I selected with case This process will only work on screens that have ili9xxx displaysThe one I purchased…
-
Sunsynk Set Modbus ID
Go to Sunsynk.net and log in Go to Inverter and select the 3 Dots circled below Click Settings Go To Advanced Settings Set Modbus SN to a number from 1 to 16 Make…
-
Connect Modbus Adapter to Sunsynk
You will need the following items to complete this Industrial USB to RS485 Converter Adapter RJ45 Shielded Cable You don’t always need shielded cable but it is my preference especially as you are passing…
-
Home Assistant Install HACS
Go To Settings –> Add-ons –> Add-on Store Click Advanced SSH & Web Terminal Click Install Set the options below then go to Configuration tab Set and appropriate Username & Password and disable…